Publications
期刊論文
收錄實驗室歷年發表的 SCI 期刊論文、國際會議論文、專書與發明專利，呈現長期的學術研究與技術積累。
52筆符合條件
期刊論文
2026
- 影像視覺Signal Processing: Image Communication
148, 117651
Noise robustness and performance analysis of metaheuristic algorithms for minimum enclosing triangle computation in point clouds
Bo-Lin Jian, Anggara Trisna Nugraha, Wen-Lin Chu
DOI 10.1016/j.image.2026.117651 - 生醫訊號Sensors and Materials
38(8-1), 4399–4414
Feasibility of Eulerian video magnification for noncontact heart rate monitoring in older adults with dementia
Bo-Lin Jian, Jun-Shen Shi, Wen-Lin Chu, Yu-Min Li, Min-Wei Huang, Chia-Chin Hsu, Pei-Jen Chen
DOI 10.18494/SAM6444 - 影像視覺Optics Communications
608, 133058
Comprehensive quality improvement in schlieren technology using integrated hardware and deep learning approaches
Bo-Lin Jian, Jia-Ming Zhou, Yi-Wei Lin, Wen-Lin Chu, Chao-Chung Peng
DOI 10.1016/j.optcom.2026.133058 - 影像視覺Int. J. of Advanced Manufacturing Technology
Attention-enhanced deep learning framework with explainability and transfer learning for X-ray inspection
Ting-Hsueh Chuang, Bo-Lin Jian, Chao-Chung Peng
- 影像視覺Signal Processing: Image Communication
140, 117425
Research on an adaptive robust ellipse fitting method integrating multiple weight strategies
Bo-Lin Jian, Chao-Chung Peng, Wen-Lin Chu
DOI 10.1016/j.image.2025.117425
2025
- 影像視覺J. of Mechanical Science and Technology
39(12), 7839–7848
Development and validation of the continuous region segmentation method for low-light rescue operations
Chao-Chung Peng, Bo-Lin Jian, Chun-Chia Chen, Wen-Lin Chu
DOI 10.1007/s12206-025-1141-1 - 精密量測Int. J. of Precision Engineering and Manufacturing
26, 3137–3152
A novel approach for temperature-sensitive point selection and thermal error modeling in CNC lathing
Wen-Lin Chu, Jun-Ye Luo, Bo-Lin Jian
DOI 10.1007/s12541-025-01255-0 - 影像視覺Applied Artificial Intelligence
39(1), e2449296
Discrete wavelet transform sampling for image super resolution
Chieh-Li Chen, Heng-Lin Yao, Bo-Lin Jian
DOI 10.1080/08839514.2024.2449296 - 農業畜牧Biosystems Engineering
104276
Application of weight prediction for Holstein dairy cows in non-pregnant and postpartum stages
Hsin-I Chiang, Jia-Ming Zhou, Wen-Lin Chu
DOI 10.1016/j.biosystemseng.2025.104276 - 生醫訊號BMC Psychiatry
A correlation study on EEG signals during visual concentration test and clinical evaluation in schizophrenia patients
Min-Wei Huang, Qun-Wei Chang, Wen-Lin Chu
DOI 10.1186/s12888-025-07237-w - 影像視覺Sensors
25(4), 1105
Enhanced U-Net with multi-module integration for high-exposure-difference image restoration
Bo-Lin Jian, Hong-Li Chang, Chieh-Li Chen
DOI 10.3390/s25041105 - 精密量測IEEE Sensors Journal
25(2), 2341–2351
Leveraging dynamic color schlieren imaging for enhanced airflow velocity prediction
Wen-Lin Chu, Jia-Ming Zhou, Bo-Lin Jian
DOI 10.1109/JSEN.2024.3504564
2024
- 影像視覺Multimedia Tools and Applications
AVAFN: adaptive variational autoencoder fusion network for multispectral image
Wen-Lin Chu, Ching-Che Tu, Bo-Lin Jian
DOI 10.1007/s11042-024-20340-6 - 資訊整合Microsystem Technologies
30(12), 1609–1621
Unsupervised anomaly detection in the textile texture database
Wen-Lin Chu, Qun-Wei Chang, Bo-Lin Jian
DOI 10.1007/s00542-024-05711-1 - 精密量測Case Studies in Thermal Engineering
Integrating machine learning and feature analysis for predicting and managing thermal deformation in machine tools
Wen-Lin Chu
DOI 10.1016/j.csite.2024.104343 - 影像視覺IEEE Trans. on Computational Imaging
10, 291–303
A study on establishing a dynamic color schlieren system to observe airflow and predict temperature changes
Bo-Lin Jian, Jia-Ming Zhou
DOI 10.1109/TCI.2024.3365369
2023
- 精密量測Sensors and Materials
35(12), 4397–4415
Spindle thermal error prediction based on BPNN and hybrid Taguchi genetic algorithm for a CNC machine tool
Chi-Yuan Lin, Shu-Cing Wu, Chi-Hsien Hu, Bo-Lin Jian
DOI 10.18494/SAM4674 - 影像視覺Signal, Image and Video Processing
17(8), 4209–4217
Multi-level optimal fusion algorithm for infrared and visible image
Bo-Lin Jian, Ching-Che Tu
DOI 10.1007/s11760-023-02653-5 - 生醫訊號J. of Suicidology
Application of machine learning analysis for prediction of repeated suicide attempts among the attempters: a nationwide population study in Taiwan
Min-Wei Huang, Bo-Lin Jian, Kai-Sen Fan, Chia-Yi Wu, Ming-Been Lee, Chia-Ta Chan, Chun-Ying Chen
- 系統工程Int. J. of Advanced Manufacturing Technology
Experiment for improving the manufacturing process of composite material made serpentine pipe parts using ceramic lost foam mold
Shang-Kuo Yang, Lei-Hu Chen, Wen-Lin Chu
DOI 10.1007/s00170-022-10670-w
2022
- 系統工程Int. J. of Advanced Manufacturing Technology
123(5-6), 1925–1943
The simulation and design of an ultrasonic vibrator using coolant through the spindle structure
Bo-Lin Jian, Chia-Chuan Liu, Hao-Yang Lin, Her-Terng Yau
DOI 10.1007/s00170-022-10255-7 - 影像視覺J. of Mechanical Science and Technology
36(9), 4815–4824
Analyze the thermal dynamic images during the processing based on the causation system
Wen-Lin Chu, Chun-Chia Chen, Bo-Lin Jian
DOI 10.1007/s12206-022-0840-0 - 系統工程Applied Sciences
12(17), 8419
Redundant robot with pneumatic artificial muscles for rehabilitation works using iterative learning control
Wen-Lin Chu, Chih-Jer Lin, You-Yuan Chen
DOI 10.3390/app12178419 - 精密量測IEEE Sensors Journal
22(17), 17031–17042
Establishment of low-cost and stable prediction models applied for thermal displacements in three axes
Jun-Ye Luo, Bo-Lin Jian
DOI 10.1109/JSEN.2022.3192547 - 精密量測IEEE Sensors Journal
Research on the recognition of machining conditions based on sound and vibration signals of a CNC milling machine
Wen-Lin Chu, Min-Jia Xie, Qun-Wei Chang, Her-Terng Yau
DOI 10.1109/JSEN.2022.3150751
2021
- 系統工程J. of Low Frequency Noise, Vibration and Active Control
40(2), 978–992
Intelligent integrated monitoring system for lathe equipment
Bo-Lin Jian, Chin-Tsung Hsieh, Yu-Syong Guo
DOI 10.1177/1461348419889502 - 系統工程J. of Low Frequency Noise, Vibration and Active Control
40(1), 347–366
An image vision and automatic calibration system for universal robots
Bo-Lin Jian, Chi-Shiuan Tsai, Ying-Che Kuo, Yu-Syong Guo
DOI 10.1177/1461348419874925 - 系統工程J. of Low Frequency Noise, Vibration and Active Control
40(1), 195–216
Nonlinear dynamic analysis of gear-rotor-bearing system equipped with HSFD under hydraulic actuator active control
Bo-Lin Jian, Li-Ming Chu, Yuh-Ping Chang, Cai-Wan Chang-Jian
DOI 10.1177/1461348419886219 - 精密量測IEEE Access
9, 53509–53517
Bearing fault diagnosis based on chaotic dynamic errors in key components
Bo-Lin Jian, Xiao-Yi Su, Her-Terng Yau
DOI 10.1109/ACCESS.2021.3069566 - 系統工程Actuators
Tracking control of pneumatic artificial muscle-activated robot arm based on sliding-mode control
Chih-Jer Lin, Ting-Yi Sie, Wen-Lin Chu, Her-Terng Yau, Chih-Hao Ding
2020
- 影像視覺Sensors and Materials
32(12), 4217–4231
Deep learning model for determining defects of vision inspection machine using only a few samples
Bo-Lin Jian, Jui-Pin Hung, Cheng-Chi Wang, Chia-Chuan Liu
DOI 10.18494/SAM.2020.3101 - 系統工程J. of Low Frequency Noise, Vibration and Active Control
Active multimode vibration control of a smart structure using macro fiber composite actuators based on ANFIS
Wen-Lin Chu, Chih-Jer Lin, Ming-Jia Li
- 精密量測J. of Low Frequency Noise, Vibration and Active Control
Diagnosis of ball-bearing faults using support vector machine based on the artificial fish-swarm algorithm
Chih-Jer Lin, Wen-Lin Chu, Cheng-Chi Wang, Chih-Keng Chen, I-Ting Chen
- 生醫訊號Sensors and Materials
Wavelet analysis of electroencephalography signals of visual emotion induction in schizophrenia patients
Wen-Lin Chu, Min-Wei Huang, Te-Nan Tsai, Qun-Wei Chang
- 精密量測IEEE Access
8, 199359–199368
An automatic intelligent diagnostic mechanism for the milling cutter wear
Bo-Lin Jian, Kuan-Ting Yu, Xiao-Yi Su, Her-Terng Yau
DOI 10.1109/ACCESS.2020.3035157 - 生醫訊號IET Image Processing
14(13), 3089–3094
Analysis of the correlation between infrared thermal sequence images of nostril area and respiratory rate
Bo-Lin Jian, Min-Wei Huang, Shin-Hsiung Lee, Her-Terng Yau
DOI 10.1049/iet-ipr.2019.0416 - 系統工程IEEE Access
The optimization of lathe cutting parameters using a hybrid Taguchi-genetic algorithm
Wen-Lin Chu, Min-Jia Xie, Li-Wei Wu, Yu-Syong Guo, Her-Terng Yau
- 系統工程Sensors and Materials
32(3), 843–858
Optimization of lathe cutting parameters using Taguchi method and grey relational analysis
Bo-Lin Jian, Cheng-Chi Wang, Her-Terng Yau, Li-Wei Wu, An-Hong Tian
DOI 10.18494/SAM.2020.2674 - 影像視覺Applied Sciences
10(6), 2178
Multifocus image fusion using a sparse and low-rank matrix decomposition for aviator’s night vision goggle
Bo-Lin Jian, Wen-Lin Chu, Yu-Chung Li, Her-Terng Yau
DOI 10.3390/app10062178 - 精密量測Energies
13(4), 949
A linear regression thermal displacement lathe spindle model
Chih-Jer Lin, Xiao-Yi Su, Chi-Hsien Hu, Bo-Lin Jian, Li-Wei Wu, Her-Terng Yau
DOI 10.3390/en13040949 - 精密量測IEEE Access
8, 28267–28275
Inspection on ball bearing malfunction by Chen-Lee chaos system
Chih-Jer Lin, Xiao-Yi Su, Kuan-Ting Yu, Bo-Lin Jian, Her-Terng Yau
DOI 10.1109/ACCESS.2020.2971554 - 精密量測Sensors and Materials
32(1), 417–430
Optimizing back propagation neural network parameters to judge fault types of ball bearings
Bo-Lin Jian, Cai-Wan Chang-Jian, Yu-Syong Guo, Kuan-Ting Yu, Her-Terng Yau
DOI 10.18494/SAM.2020.2605 - 精密量測Sensors and Materials
32(1), 431–445
Prediction of spindle thermal deformation and displacement using back propagation neural network
Bo-Lin Jian, Yu-Syong Guo, Chi-Hsien Hu, Li-Wei Wu, Her-Terng Yau
DOI 10.18494/SAM.2020.2616 - 生醫訊號Sensors and Materials
Recognition of eyelid movement using electroencephalographic signals
Wen-Lin Chu, Chih-Jer Lin, Ching-Hao Chen
- 生醫訊號Sensors and Materials
Using encephalography to classify mind states associated with cycling activities
Wen-Lin Chu, Chih-Jer Lin, Po-Wei Hsiao
2019
- 資訊整合Applied Sciences
Detection and classification of advanced persistent threats and attacks using the support vector machine
Wen-Lin Chu, Chih-Jer Lin, Ke-Neng Chang
- 精密量測Sensors
Fault diagnosis of a rotor and ball-bearing system using DWT integrated with SVM, GRNN, and visual dot patterns
Wen-Lin Chu, Chih-Jer Lin, Kai-Chun Kao
- 精密量測Int. J. of Advanced Manufacturing Technology
104(9-12), 4665–4674
Predicting spindle displacement caused by heat using the general regression neural network
Bo-Lin Jian, Cheng-Chi Wang, Chin-Tsung Hsieh, Ying-Piao Kuo, Mao-Chin Houng, Her-Terng Yau
DOI 10.1007/s00170-019-04261-5 - 生醫訊號IEEE Access
7, 93501–93510
Optimization method of IR thermography facial image registration
Bo-Lin Jian, Chieh-Li Chen, Chih-Jer Lin, Her-Terng Yau
DOI 10.1109/ACCESS.2019.2927747 - 生醫訊號Current Medical Imaging
15(5), 471–478
Brain structural MRI for joint independent component analysis in schizophrenic patients
Wen-Lin Chu, Min-Wei Huang, Bo-Lin Jian, Kuo-Sheng Cheng
DOI 10.2174/1573405613666171122163759 - 系統工程IEEE Access
7, 67278–67286
Machine tool chatter identification based on dynamic errors of different self-synchronized chaotic systems of various fractional orders
Bo-Lin Jian, Cheng-Chi Wang, Jin-Yu Chang, Xiao-Yi Su, Her-Terng Yau
DOI 10.1109/ACCESS.2019.2917094 - 生醫訊號IEEE Access
7, 48046–48052
Emotion-specific facial activation maps based on infrared thermal image sequences
Bo-Lin Jian, Chieh-Li Chen, Min-Wei Huang, Her-Terng Yau
DOI 10.1109/ACCESS.2019.2908819